“H” CLASS Refuse Drag Chains (H102/H104/H110/H112/H116/H120/H480)

“H” CLASS Refuse Drag Chains is utilized for conveying sawdust,wood chips, pulp, garbage, tankage, ashes, and other abrasive spend through either wooden or metal troughs. Because of its large, wide opening area, “H” CLASS Refuse Drag Chain provides sizeable transporting capacity when managed at moderate speeds.
Leading face of each barrel is flat, providing a broad area to push material along the trough and to keep the chaim from riding agricultural Chain outrageous of the material. The rounded internal part of the barrel is carefully shaped to make excellent sprocket contact. Sidebars are reinforced with putting on shoes which provide both
additional wearing surface area and stiffening for the hyperlink. A vertical member on each sidebar assures added link rigidity and shields the pin from harm.
“H”CLASS Refuse Drag Chain comes in EVRT-POWER Promal or Duramal with a tensile strength range of 36,400 to 52,000 pounds. This rugged working chain comes in a pitch range of 5.000 to 8.000 inches. Each hyperlink is stated in accordance with manufacturer’s requirements and may be interchanged with links created by other chain manufacturers. “H”CLASS Refuse Drag Chain comes in riveted construction only. Grease chambers, cored into each link’s barrel, hold grease which lubricates pins.
Wide faced sprockets, either of machined or cast steel, are recommended for”H” class Refuse Drag Chain procedure. Links should be run in direction of the closed barrel.