greenhouse gearbox

The EP PolyGearbox (RPG) is a compact and lightweight reduction gearbox with a built-in limit switch system that’s suitable for assembly of a locally available electric electric motor. The PolyGearbox can be used in manually-controlled or climate-controlled ventilation and display screen systems in poly greenhouses. The quick and easy-to-installEP PolyGearbox is certainly rainproof and windproof. The PolyGearbox includes a high protection course (IP65) and can be used in an ambient temperature of 0-60 °C.

The low-noise PolyGearbox includes a gearwheel transmission and a worm wheel transmission, which are integrated in an aluminium precision housing. The self-braking worm wheel tranny ensures that the drive shaft is definitely locked when the decrease gearbox is not running. The completely sealed reduction gearbox comes with an growth chamber with a diaphragm to keep the gear oil at a low pressure under all circumstances, even at high temps. Thanks to the use of an expansion chamber, the PolyGearbox could be installed in any placement. There are no limitations, because there is no need for a bleed connect. The sealed reduction gearbox keeps the Gear motors for Greenhouse apparatus oil of the PolyGearbox in ideal condition for its entire operating lifetime. The PolyGearbox is ideal for discontinuous use, working course s3-30%, with a maximum activation time of 25 minutes.

The PolyGearbox reduction gearbox has an FT85 motor assembly flange, on to which a suitable IEC standard electric motor can certainly be installed (EN 50347).

The PolyGearbox includes a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off at the end positions. The limit switch system is installed within an integrated chamber and is enclosed by an impact-resistant plastic cover. The limit switch system is accessible and easy to adjust. The limit change system’s maximum switching range is usually 40 or 64 revolutions of the drive shaft. The cabling is connected in spring-clip connections. The PolyGearbox has an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.

TAGs:

China Timing Pulley

As one of the leading timing pulley manufacturers, suppliers, and exporters of mechanical products, We offer timing pulleys and many other products.

Please contact us for details.

Mail: [email protected]

Manufacturer supplier exporter of China timing pulley.

Recent Posts

As one of the leading China Timing Pulley manufacturers, mechanical product suppliers, and exporters, we supply timing pulley and many other products. Find China timing pulley Manufacturers and Suppliers. Choose from quality China timing pulley manufacturers, suppliers, and exporters on china-timing-pulley.com.
The above information is only for knowledge sharing, product, and manufacturer introduction. For non-commercial purposes. All content is from the web. The article is our opinion. If there is any copyright infringement or finds objectionable information, please contact us, and we will delete it immediately. Address:2-25 S Clark St, Denver, America. The use of original equipment manufacturer (OEM) part numbers or trademarks is for informational purposes only, describing product use and compatibility and replacing damaged original equipment parts. Our company and the replacement parts listed here are not sponsored, approved, or manufactured by an OEM.edited by lyl.