The EP Greenhouse Gearbox is a concise and lightweight reduction gearbox with a limit switch system that’s ideal for assembly of a locally available electric electric motor. The Gearbox can be used in manually-managed or climate-controlled ventilation and display systems in greenhouses. The quick and easy-to-installEP Gearbox can be rainproof and windproof. The Gearbox includes a high protection course (IP65) and can be utilized in an ambient temperature of 0-60 °C.
The low-noise Gearbox for Greenhouse has a gearwheel transmission and a worm wheel transmission, which are integrated within an aluminium precision housing. The self-braking worm wheel transmitting means that the drive shaft can be locked when the reduction gearbox is not running. The fully sealed reduction gearbox comes with an growth chamber with a diaphragm to keep carefully the gear essential oil at a minimal pressure under all circumstances, even at high temps. Thanks to the utilization of an growth chamber, the Gearbox can be installed in any position. There are no limitations, since there is no Gear motors for Greenhouse dependence on a bleed plug. The sealed reduction gearbox keeps the apparatus oil of the Gearbox in optimal condition for its entire operating life time. The Gearbox is suitable for discontinuous use, working course s3-30%, with a maximum activation time of 25 minutes.
THE APPARATUS box reduction gearbox comes with an FT85 motor assembly flange, to which the right IEC standard motor can simply be installed (EN 50347).
The Gear box has a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off by the end positions. The limit switch system is installed in an included chamber and is usually enclosed by an impact-resistant plastic-type material cover. The limit switch system is obtainable and simple to adjust. The limit change system’s optimum switching range is definitely 40 or 64 revolutions of the drive shaft. The cabling is linked in spring-clip connections. The Gearbox comes with an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.
The Gearbox for greenhouse comes with 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates can be found as accessories.
Maximum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in case of application of 4-pole electric motor.
Protection class IP65.
Can be used in ambient temperature ranges of 0-60°C.
Ideal for discontinuous use, operating class s3-30%, maximum activation time 25 minutes.
Equipped as standard with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installing IEC standard motor (EN 50347).
Maximum switching selection of limit switch system 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).