Fan Motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Explanation: New fan motor, taken off unused 18” or 24” China Surroundings Compressor diameter TPI fans. Made to operate an 18” or 24” enthusiast blade (blade NOT included).
This motor includes a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All the wiring between your electric electric motor, capacitor and quickness control change is still hooked up nevertheless the cord itself is generally detached as observed in the photos. (Find “Control Notice” below for alter type.)
T (See “Software Notice” below for make use of in various other applications.)
Measurements: The engine body is 5” diameter and 3 ½” long (not including the shaft). The engine shaft is½” (0.500″) diameter x 2 ½” lengthy with a collection screw smooth. There are (4) threaded mounting lugs on the front of the motor, ½” lengthy x .16 dia. with washers and nuts. The studs may actually ‘ve got 4mm threads and also to be on a 117mm (4.6”)diameter circle (3 ¼” measured from one stud to another).
Rate: The approximate motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Path of rotation (facing the shaft end of the electric motor) is Clockwise.
Control Take notice: Motors will come with EITHER a 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we have demonstrated BOTH variations in the images). Both of these types of switches both control the engine in the same way (but you have a rotating knob and you possess a pull-chain). If you order several engine at the same time, we can do our better to supply your order with each one kind of control or the additional.
Application Note: USUALLY DO NOT use this electric electric motor in a nonfan application. This is a completely enclosed fan electric engine and designed to have constant ventilation over the engine casing for cooling. The casing isn’t vented and the electric powered electric motor will overheat and get into automatic thermal overload if run in a nonfan program where there isn’t strong ventilation past the motor. (Caution Note: the electrical motor will restart instantly when it cools cool off.) Using this electric motor for Electric Fan Motor applications aside from 18 & 24″ TPI fans could also overload the motor and cause it to proceed into automatic thermal overload. (Your companion blade from another manufacturer may have a steeper blade angle.)
Origin: This electric engine is manufactured in China.