electric fan motor

Fan Motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Description: New fan motor, taken off unused 18” or 24” China Air Compressor diameter TPI fans. Designed to run an 18” or 24” enthusiast blade (blade NOT included).
This motor has a (detached) cord with grounded plug, motor capacitor and a 3-speed electric fan motor china control switch. All of the wiring between your electric electric motor, capacitor and quickness control change is still hooked up however the cord itself is generally detached as seen in the photos. (Discover “Control Notice” below for change type.)
T (See “Program Notice” below for make use of in a variety of other applications.)
Dimensions: The engine body is 5” diameter and 3 ½” long (not including the shaft). The engine shaft is½” (0.500″) diameter x 2 ½” lengthy with a collection screw easy. There are (4) threaded mounting lugs on leading of the motor, ½” long x .16 dia. with washers and nuts. The studs may actually ‘ve got 4mm threads and also to end up being on a 117mm (4.6”)diameter circle (3 ¼” measured from one stud to the next).
Rate: The approximate engine speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Path of rotation (facing the shaft end of the electric powered motor) is Clockwise.

Control Take note: Motors may come with The 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we’ve demonstrated BOTH versions in the images). These two types of switches both control the engine just as (but you possess a rotating knob and you have got a pull-chain). If you order several motor at a time, we will do our best to supply your order with each one kind of control or the additional.
Application Note: USUALLY DO NOT use this electric motor in a nonfan application. This is a totally enclosed fan electric motor and made to have constant ventilation over the engine casing for cooling. The housing isn’t vented and the electric powered electric motor will overheat and get into automatic thermal overload if operate in a nonfan system where there isn’t strong ventilation past the engine. (Caution Note: the electrical motor will restart instantly when it cools back off.) Using this electric motor for applications apart from 18 & 24″ TPI fans may possibly also overload the electric motor and cause it to proceed into automated thermal overload. (Your companion blade from another producer may possess a steeper blade angle.)
Origin: This electric engine is manufactured in China.