900 CLASS SUGAR MILL CHAINS 901 902 907 5174

900 SERIES PINTLE CHAINS, sometimes known as “sugar mill” or “intermediate carrier chain” can be used extensively in sugar mills. Multiple strands of 900 Pintle Chain, available with a couple of holes per link, could be fitted with overlapping beaded carrier slats to form a continuing apron conveyor for intermediate carrier service.
The pin holes at the closed end of the 900 Class link are given with smooth bushings which are press-fitted into the links and keyed into place. The bushings are renewable and will be driven out and replaced if they become worn. 900 Class Pintle Chain was created with dual barrels, one on each part of the open up end of the links, to accommodate double sprockets. The Transmission Chain objective of this driving technique is to eliminate the possibility of materials build-up in the sprocket contact area, which often causes the chain to jump the sprocket. Heavy ribs rigidly reinforce these traveling barrels.
Our 900 Course chain links, with tensile strength from 22,500 to 32,500 pounds, are available with large sliding surfaces to lessen chain wear and prolong chain existence. Broad wearing areas and heavy cross sections synergy to provide a considerable link which is made according to manufacturer’s specifications and can perfectly replace links created by other manufacturers.
Brutaloy sprockets for 900 Class Pintle Chain are plentiful in 3.170 inches. 900 Class Pintle Chain should only be permitted to travel in a single direction; links should run in direction of their closed narrow end.
Obtainable in cottered construction only, 900 Class Chain can be assembled with T-headed pins which are locked into place by two lugs cast on the ends of the generating barrels to avoid pin rotation. Pin rotation during procedure would lead to wear on the inside of the bushing. Both head of the pin and the cottered end of the pin are protected by cast lugs on the barrel end of the links.
900 Class Pintle Chain are links cast of malleable iron or Promal (Duramal). It really is furnished with carbon metal heat treated pins and carbon metal case hardened bushings as regular. However, stainless steel pins and bushings can be provided when specified.


China Timing Pulley

As one of the leading timing pulley manufacturers, suppliers, and exporters of mechanical products, We offer timing pulleys and many other products.

Please contact us for details.

Mail:¬†[email protected]

Manufacturer supplier exporter of China timing pulley.

Recent Posts