two) Loosen the bolts only when fitting the shafts. DO NOT eliminate the bolts fully. If eliminated they could fall into the housing and result in a failure. The box have to be disassembled to retrieve the bolts if this takes place.
1) Tighten bolts to avoid oil leaking in the course of procedure. (The bolts have a seal under their heads.)
Just take treatment when tightening the four x locking bolts within the housing. These bolts correct the removable splined shafts in spot.
Notice: When fitting splined shafts.
Click on on drawing to enlarge.
1:one.eighty five velocity increaser with 13/4″Z20 splined output shaft.
If this post really did not meet your curiosity concerning pto gearbox, examine these extra ones out.